fiat 500 key cutting 500 Key Fob Replacement

If your 500 key fob fails to function Try a different one to see if your car will detect it. If it does, it could be a problem related to the battery, or water damage to the fob that was originally used.

Replace the battery first. Make sure that the new CR2032 coin battery is properly inserted, with the "+" side facing downwards in the fob.

Dead Battery

The majority of the time, when a fob's not working, it's because the battery is dying. It's easy to fix, and most fobs notify you that the battery is in low. You can find the instructions on YouTube for nearly any key fob on your vehicle or in the owner's manual. You can also replace it by taking it to an authorized locksmith or a dealer who gave it to you.

Other times, a device can not function and there could be an issue with the circuit board in the internal circuit. This isn't a lot of common but it could occur. If you dropped the fob on a hard object, it could cause damage to the internal chip. It could also happen if you use an aftermarket fob and it doesn't work. In this case, you will be required to go to a dealer or a locksmith and have it reconfigured to work with your 500.

One 2012 c265 fiat key 500 Flip Key Remote - resembles Ilco brand with lock, unlock and trunk buttons. This is a new keyless entry remote (will need to be cut and programmed by a locksmith)

Damaged Chip

A key fob from fiat panda key programming 500 is wireless device that gives the signal to the car to start once you press the button. It has a microchip that contains information about the code that is needed to communicate with the car. If the chip is damaged it won't transmit the correct code, and the car will not start. It is possible to repair this kind of damage and a locksmith will assist. United Locksmith is capable of offering this service to classic models as well, as for newer ones, so don't feel scared to contact them.

You can purchase a brand new fob and have it programmed professionally by a locksmith. It's less expensive to do this rather than going to the dealer and it performs the same. A locksmith will need some specific information from you, including the year in which your vehicle was made and the name of its model.

Rub the chip with an old dollar bill if you're not certain of what to do. The copper on the bill is abrasive enough to get rid of dirt and oxidation however, it won't cause damage to the microchip. The chip may not be repairable in the event that it has been physically damaged. This can happen if you drop it, knock it over by your vehicle, or some other kind of physical stress.

Water Damage

If you've accidentally dropped your keys in the pool, threw them in your pocket while you were swimming at the beach, or splashed them with water on a rainy day you can be sure that your fob will suffer from water damage. Even if it only has some water on the keys, this could cause serious problems for the electronics inside and stop it from working properly.

The good news is that it is possible to fix this problem by removing the key fob and using a paper towel to clean it of any dirt or water that remains. After the fob is dry, you can replace its battery. It will then begin functioning normally.

You could also take your fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals can use special equipment to ensure that the key fob works with the car's computers.

When your Fiat 500's key fob ceases to work, it could be stressful and disorienting. It is tempting to visit a dealer to get your key fob replaced, but this can be costly and inconvenient. Locksmiths can replace your key fob with no need to visit a dealership. Locksmiths are better than a dealer since they can handle all aspects of the replacement of your car's key fob without the need for a dealer visit.

Pairing Issues

If you lose your keyfob, or it stops functioning and nothing else appears to be wrong, it could be the chip. It could be because of water damage or an unresponsive battery.

Often times this can be done by following the instructions in the owner's manual. However, it's a good idea to hire an automotive locksmith take care of this if you're having issues or the instructions in your manual aren't working for you. This will ensure that the chip won't be damaged and is the most cost-effective solution.

Another issue that plagues some 500 owners is that the key fob can't secure the car. This could be a problem when you want to fill up at a gas station. Some owners have reported the locking mechanism on their 500's failing and needing to replace the entire steering intermediate shaft. This issue was described in a technical support bulletin (TSB) by Fiat.

A reputable locksmith can assist you when your Fiat is experiencing issues. They'll be able to duplicate the key you have or they can make you a new one that will lock and open the car. They can do this without having access to your old key, and it's usually cheaper than buying a new one from a dealer.