Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to try to remove the window panes by yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any shards will fall on the fabric instead of onto the floor, where they could be trodden under and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will stop drafts and water from getting into your property until a professional is able to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may want to consider using an alarm door repairing that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window so that you can access the frame. Then, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is important to replace your seal as quickly as you can to ensure that your upvc windows repairs window waterproof and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an initial test fit. The corners of the sash must align with the casing joint. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to remember that when it is about upvc door repairs near me window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with a breeze It could be hinges that are at fault. These are easily replaced by any competent DIYer and can usually be done within a few minutes.

Like all mechanical parts hinges will be damaged over time. Changing a window repair near me hinge is essentially a very simple process but it can be easier to do if you have someone to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos through our website can often solve the issue. We are always happy to offer advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges, also due to wear and tear can become misaligned, this causes gaps to develop between the sash and the frame. If they're beyond repair, it may be required to realign them. The second is the interlock, which is on the hinge side of the window, can also become misaligned, again it's possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually wear out and it is cheaper to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.